Systems

O2

Status

Configuration

Model O2
CPU MIPS RM5200SC 300 MHz
Memory 320 MB
Graphics CRM
Video AV1 audio/video
Disks

72 GB IBM
36 GB Seagate

Drives Toshiba CD-ROM
Other none

Operating System

Operating System IRIX 6.5.30
Hostname durin (current: iris)
IP Adress 192.168.1.48

Parts

tba

Current Hardware Inventory

CPU: MIPS R5000 Processor Chip Revision: 10.0
FPU: MIPS R5000 Floating Point Coprocessor Revision: 10.0
1 300 MHZ IP32 Processor
Main memory size: 320 Mbytes
Secondary unified instruction/data cache size: 1 Mbyte on Processor 0
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
FLASH PROM version 4.18
Integral SCSI controller 0: Version ADAPTEC 7880
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 1: Version ADAPTEC 7880
On-board serial ports: tty1
On-board serial ports: tty2
On-board EPP/ECP parallel port
CRM graphics installed
Integral Ethernet: ec0, version 1
Iris Audio Processor: version A3 revision 0
  PCI Adapter ID (vendor 0x9004, device 0x8078) PCI slot 1
  PCI Adapter ID (vendor 0x9004, device 0x8078) PCI slot 2
Video: MVP unit 0 version 1.4
AV: AV1 Card version 1, Camera not connected.
Vice: TRE
Graphics board 0 is "CRM" graphics.
        Managed (":0.0") 1280x1024
        32 bitplanes
        board revision 2, CRM revision C, GBE revision B
        Display 1280x1024 @ 60Hz, monitor type: Unknown

Notes

Status

Checked 24.04.2010
Report ok

Changes

Acquired 27.01.2007
Log 14. June 2008 - memory upgrade
3. July 2009 - CPU upgrade

 

Pictures

SGI O2 front with classic cube design.

Side view of an O2 with AV module installed.

Back of an O2 with AV module installed.

O2 mainboard. RM5200 CPU board hidden under PCI riser.

O2 AV module

Harddisk mounted in O2 bracket.