Status
Configuration
Model |
4D/420VGX |
CPU |
2x MIPS R3000 40 MHz |
Memory |
128 MB |
Graphics |
VGX |
Video |
none |
Disks |
1 GB Seagate Drive
|
Drives |
150 MB Tape |
Other |
VideoLab |
Operating System
Operating System |
IRIX 5.3 |
Hostname |
boromir |
IP Adress |
192.168.1.17 |
Parts
???-????-??? Rev. ?
|
+-- 030-0222-002 Rev A - IO3B IO board
|
+-- 030-0199-003 Rev F - IP15 CPU board (2x40 mhz)
|
+-- 030-0117-010 Rev A - MC2 memory board
| |
| +-- 16x 8MB modules
|
+-- 030-0232-001 Rev B - GM3B VGX Graphics manager
|
+-- 030-0153-004 Rev D - GE6 VGX display generator
|
+-- 030-0156-004 Rev C - RM2 VGX raster manager
|
+-- 030-0158-004 Rev E - DG1 VGX raster manager
|
+-- 030-0155-001 Rev B - Edge Connector VGX
|
+-- xxx-xxxx-xxx Rev x - Edge Connector VGX
Current Hardware Inventory
2 40 MHZ IP7 Processors
FPU: MIPS R2010A/R3010 VLSI Floating Point Chip Revision: 4.0
CPU: MIPS R2000A/R3000 Processor Chip Revision: 3.0
On-board serial ports: 2 per CPU board
Data cache size: 64 Kbytes
Instruction cache size: 64 Kbytes
Secondary data cache size: 1 Mbyte
Main memory size: 128 Mbytes
I/O board, slot F: IO3B
VGX Graphics option installed
Integral Ethernet: et0, IO3
Integral SCSI controller 1: Version WD33C93A, revision 9
Integral SCSI controller 0: Version WD33C93A, revision 9
Tape drive: unit 7 on SCSI controller 0: QIC 150
CDROM: unit 6 on SCSI controller 0
Disk drive: unit 1 on SCSI controller 0
VME bus: adapter 0
Graphics board 0 is "VGX" graphics.
Managed (":0.0") 1280x1024
5 spans, IMP3
EV mask = 0x0
1 screen(s) on this pipe
GM bi-endian ready
Pictures
PowerSeries 4D/420VGX in PowerSeries 4D/240GTX skins.
PowerSeries 4D/420VGX in PowerSeries 4D/240GTX skins.
PowerSeries 4D/420VGX in PowerSeries 4D/240GTX skins.
PowerSeries 4D/420VGX in PowerSeries 4D/240GTX skins.
Cardcage view of a 4D/420 VGX.